Waktu bekerja:isn - Sab 8.00 - 18.00 Hubungi Kami: (+86) 317 3736333

Palang Paip Keluli

buttweld-cross.jpg

The steel pipe cross is used when there is a branch on the main pipeline that needs to be connected. When the size of the branch is the same as the header pipe equal cross is used and when the branch size is less than the header size, then, unequal cross is better. Our company applies hydroforming and hot press forming to manufacture steel crosses which are made of seamless pipe. Hydroforming can complete steel pipe cross shape forming at once, thus getting high efficiency.

Materials for making our pipe cross are often low carbon steel, low alloy steel and stainless steel to strain hardening tendency. Namun begitu, if hot press forming technology is adopted and equipment required is of small tonnage. Besides, large diameter and large wall thickness steel cross are usually manufactured by means of hot press forming.

The maximum wall thickness of the steel pipe cross is 150 mm and some schedule numbers are sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140, sch160, xxs, sch5s, sch20s, sch40s dan sch80s. Our steel cross and related pipe fittings are widely used in electricity, gasoline, petrokimia, ship building, heat supply network, paper making and metallurgical industries among others.

 

Saiz
Seamless pipe cross: 1/2″~24DN15~DN600
Welded pipe cross: 24 “~60” DN600~DN1500
Ketebalan dinding
sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100,
sch120, sch140, sch160, xxs, sch5s, sch20s, sch40s, sch80s
Maximun Wall thickness: 200mm

Abter Supply can often provide the items listed below for a same-day delivery. Large quantites, custom sizes, Carbon steel and special alloys (Aloi 20, Monel, Hastelloy, Inconel, dll) may be subject to a longer lead time for delivery.

 

CARBON STEEL BUTT WELD FITTINGS

  • ASTM A234 Carbon steel Cross – Wrought Carbon and Alloy Steel Butt Weld Fittings : This specification covers wrought carbon steel and alloy steel butt weld fittings of seamless and welded construction. This is the most common material for carbon steel butt weld fittings (specifically grade WPB) and is seamless up to 24”, where diameters of 24” or larger may come seamless or welded. These butt weld fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures.
  • ASTM A860: This specification covers wrought high-strength ferritic steel butt weld fittings of seamless and electric fusion-welded construction covered by the latest revisions of ASME B16.9 and MSS-SP-75. These butt weld fittings are for use in high-pressure gas and oil transmission and distribution systems.

STAINLESS STEEL BUTT WELD CROSS FITTINGS

  • Seamless and Welded Stainless Butt Weld CROSS FITTINGS: This specification covers the standard for seamless and welded wrought austenitic stainless steel butt weld fittings for pressure piping applications.
Catatan Berkaitan
Kelengkapan Siku Paip Keluli

Pipe fittings are used in plumbing systems to connect straight sections of pipe or tubes, to accommodate different sizes or shapes, and for other purposes such as regulating (or measuring) fluid flow. These fittings are used in plumbing systems to control the transfer of water, gas or liquid waste within pipes or plumbing systems in domestic or commercial environments. Kelengkapan (especially uncommon types) require money, time, materials and tools to install and are an important part of plumbing and plumbing systems. Common pipe fittings mainly include: bebibir, elbows, couplings, unions, spools, reducers, bushings, tees, diverter tees, crosses, topi, plugs, barbs and valves. Although valves are technically fittings, they are usually discussed separately.

Bengkok Paip : keluli karbon, keluli aloi dan keluli tahan karat

Badan pemasangan paip biasanya diperbuat daripada bahan asas yang sama dengan paip atau tiub yang disambungkan: Tembaga, keluli, PVC, CPVC atau ABS. Sebarang bahan yang dibenarkan oleh paip, kesihatan atau kod bangunan (mengikut mana yang berkenaan) boleh digunakan, tetapi ia mesti serasi dengan bahan lain dalam sistem, cecair yang disalurkan, dan suhu dan tekanan di dalam (dan luar) sistem. Kelengkapan tembaga atau gangsa di atas kuprum Biasa dalam sistem paip dan paip. Ketahanan api, rintangan kejutan, kekuatan mekanikal, anti-kecurian dan faktor lain juga mempengaruhi pilihan bahan untuk kelengkapan paip.

Tee Paip Kimpalan Punggung

Bahan Keluli Tahan Karat ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 316/316L, DARI 1.4301, DIN1.4306, DARI 1.4401, DARI 1.4404 Dimensi ANSI B16.9, ANSI B16.28, MSS-SP-43 Jenis A, MSS-SP-43 Jenis B, HE B2312, JIS B2313 Jadual Ketebalan 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS dan lain-lain.

Pengurang Paip – Konsentrik dan Sipi

Pengurang sepusat digunakan di mana kerja paip dipasang secara menegak dan di bahagian pelepasan pam. Pengurang eksentrik lebih kerap digunakan apabila kerja paip diletakkan di atas rak paip. Kerana bahagian yang rata, menjajarkan dan memasang paip dengan selamat ke rak adalah lebih mudah.

Penutup Paip Buttweld, Penutup kimpalan Punggung SS, Penutup Paip ANSI B16.9

Butt Weld Cap Kami adalah pengeluar butt weld cap dan membekalkan semua jadual dalam jenis bahan seperti keluli karbon, keluli tahan karat, keluli aloi. Zizi menghasilkan penutup paip di ASME, DARI, JIS dan piawaian lain yang diperlukan. Penutup paip adalah salah satu kelengkapan paip yang biasa digunakan untuk menghentikan bendalir dengan menutup di hujung paip. Ia boleh didapati dalam jenis kimpalan punggung, jenis kimpalan soket dan jenis berulir, dan topi buttweld lebih popular memandangkan prestasi yang baik, sambungan yang stabil dan julat pemilihan dimensi yang besar.

paip & Kelengkapan

Abter PIPELINE

Untuk pertanyaan jualan atau harga pada Produk Abter, sila hubungi salah satu jualan kami.
(+86) 317 3736333

www.pipeun.com

[email protected]

lokasi

Kami Di Mana-mana




berhubung

Ikuti Aktiviti Kami

Pensijilan

Carta Prestasi Produk Paip Talian

Pengedar dan Ejen Sah



Catatan Berkaitan
Kelengkapan Siku Paip Keluli

Pipe fittings are used in plumbing systems to connect straight sections of pipe or tubes, to accommodate different sizes or shapes, and for other purposes such as regulating (or measuring) fluid flow. These fittings are used in plumbing systems to control the transfer of water, gas or liquid waste within pipes or plumbing systems in domestic or commercial environments. Kelengkapan (especially uncommon types) require money, time, materials and tools to install and are an important part of plumbing and plumbing systems. Common pipe fittings mainly include: bebibir, elbows, couplings, unions, spools, reducers, bushings, tees, diverter tees, crosses, topi, plugs, barbs and valves. Although valves are technically fittings, they are usually discussed separately.

Bengkok Paip : keluli karbon, keluli aloi dan keluli tahan karat

Badan pemasangan paip biasanya diperbuat daripada bahan asas yang sama dengan paip atau tiub yang disambungkan: Tembaga, keluli, PVC, CPVC atau ABS. Sebarang bahan yang dibenarkan oleh paip, kesihatan atau kod bangunan (mengikut mana yang berkenaan) boleh digunakan, tetapi ia mesti serasi dengan bahan lain dalam sistem, cecair yang disalurkan, dan suhu dan tekanan di dalam (dan luar) sistem. Kelengkapan tembaga atau gangsa di atas kuprum Biasa dalam sistem paip dan paip. Ketahanan api, rintangan kejutan, kekuatan mekanikal, anti-kecurian dan faktor lain juga mempengaruhi pilihan bahan untuk kelengkapan paip.

Tee Paip Kimpalan Punggung

Bahan Keluli Tahan Karat ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 316/316L, DARI 1.4301, DIN1.4306, DARI 1.4401, DARI 1.4404 Dimensi ANSI B16.9, ANSI B16.28, MSS-SP-43 Jenis A, MSS-SP-43 Jenis B, HE B2312, JIS B2313 Jadual Ketebalan 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS dan lain-lain.

Pengurang Paip – Konsentrik dan Sipi

Pengurang sepusat digunakan di mana kerja paip dipasang secara menegak dan di bahagian pelepasan pam. Pengurang eksentrik lebih kerap digunakan apabila kerja paip diletakkan di atas rak paip. Kerana bahagian yang rata, menjajarkan dan memasang paip dengan selamat ke rak adalah lebih mudah.

Penutup Paip Buttweld, Penutup kimpalan Punggung SS, Penutup Paip ANSI B16.9

Butt Weld Cap Kami adalah pengeluar butt weld cap dan membekalkan semua jadual dalam jenis bahan seperti keluli karbon, keluli tahan karat, keluli aloi. Zizi menghasilkan penutup paip di ASME, DARI, JIS dan piawaian lain yang diperlukan. Penutup paip adalah salah satu kelengkapan paip yang biasa digunakan untuk menghentikan bendalir dengan menutup di hujung paip. Ia boleh didapati dalam jenis kimpalan punggung, jenis kimpalan soket dan jenis berulir, dan topi buttweld lebih popular memandangkan prestasi yang baik, sambungan yang stabil dan julat pemilihan dimensi yang besar.